Please download the Hotfix from the TIBCO Support Customer Portal Web UI using their username and password for the TIBCO Support Web page. Once logged on you can find the Hotfix under the Download Menu :
AvailableDownloads/Mainframe/Substation/2.14.0/hotfix-07

Defect corrections:

  SSES-2196 - Normal
  
  New program SXCRRVT to display active CICS Req/Reply information.
  Transactions SXVT or XTVT (RED) executes the new program.
  XTVT,? or HELP for a full set of options.

  
  SSES-2195 - Normal
  
  Issue corrected where either transaction XTTO or SXTO will execute
   for hours without completing within 30 seconds of inactivity.
  This issue has been resolved.
  
    
  SSES-2191 - Important
  
  Hot Fix 7D fully supports versions z/OS 2.5 and CICS 5.6.
  z/OS builds and certification completed.
 
 
  SSES-2189 - Important
  
  Logger records for CICS ID3 line showed an incorrect Date/Time.
  Hot Fix 7 fully supports versions z/OS 2.5 and CICS 5.6.
  This issue has been resolved.

 
  SSES-2188 - High
  
  Stop recursive SYSLOG info messages when SYSLOG files are not defined
   or the HUB is not active or not defined.
  Logger routines have been updated to stop the repeated issuing of
   messages when a program or process keeps calling the SYSLOG function.
  Minimal message output is now issued.
  

  SSES-2187 - High 
  
  Correct request/reply issue when the data area size exceeds RR-MAXSIZE value.
  If a user manages to produce a request with a size larger than the
   specified RR-MAXSIZE in the CICS interface this message will be issued.
   SXC3103I IId:CTSRC1 Task#:246 CA AreaLen:5000 DataLen:4184 MaxRR:5000

  This message can also be always generated for a CICS R/R request by
   issuing the following operational command:
   /F <job-name>,SET,CICS,TRCLVL-TRIG=3
  Additional checks and a new message is the result.
 
 
  SSES-2186 - Normal 
   
  New updated program SXR3ISL2 replaces current program SXR3ISL1.
  New options available and the ability to reply to messages requiring
   a response.
  This is a TIBCO Rendezvous messaging sample program.
 
 
  SSES-2185 - Normal 
   
  New IVP modules SXCCI040, SXXCCI40 used with containers SendTo and ReplyTo
   as variables for the ESB (RV & EMS).
  The trigger request using containers enables Substation ES to dynamically
   set the ReplyTo and SendTo subjects or destinations for a message.
  Transactions SXTC and XTTC are by default supported.
  SXTC,? for help
 
 
  SSES-2177 - High
  
  Key information missing in trace file view of the system logger stream.
  Values for messages such as Function, Line number and ProcessId were 
    missing.
  This has been fixed.
  
  
  SSES-2181 - High - Batch sample program
  Date of message received was 100 years ahead of the current date whilst
   running EMS Error Listener.
  Issue resolved.
  

================================================================================
  Hotfix 06
  ---------
  
  SSES-2174 - High - WebUI / TCP
  
  TCP Interface abends when an 8 char userid is specified from WebUI.
  The correct length is now passed to the SAF interface.
  Issue resolved.
  
  
  SSES-2173 - Critical - CICS EXCI
  
  Substation may sometimes not enable suspended recipe services.
  The Admin interface did not always receive the notifications.
  This issue mainly occurs when two or more interfaces from the
   same Substation go to the same CICS region. It's possible
   that other cases may also produce this error.
  Issue has been resolved.
  

  SSES-2172 - High - CICS EXCI
  
  Substation does not shutdown immediately and needs to be canceled when
   any of its CICS regions are down at the start of the shutdown.
  Issue has been resolved.

   
  SSES-2170 - Normal - Log Stream Viewer
  
  Allow logger viewed data to be written to a data set.
  The implementation for the enhancement requires a few changes.
  Panel updates: SXLLBHLP, SXLLPARM
  Clist Updates: SXLRVIEW. Please ensure to update this Clist.
  An output dataset needs to be allocated and cataloged with
   the following DCB information.
   RECFM=VB,LRECL=324,DSORG=PS
  On the viewed logger information panel, type in help or use the #O
   to write to the dataset specified on the selection criteria panel.

   
  SSES-2169 - Critical - CICS RED (update)
  
  The cause of error message SXX8303E has been fixed in Substation. After 
   certain CICS reconnect conditions, Substation ES connection to RED failed
   to join. This has been fixed.
   

================================================================================
  Hotfix 05
  ---------
  
  SSES-2169 - Critical - CICS RED
    
  Substation ES does not auto reconnect to CICS when using the RED
   interface. This occurs when CICS is down, Substation is started
   and then CICS is started almost immediately after the Substation has
   been started. CICS regions may not be automatically reconnected.
  This has been fixed.
  
  
  SSES-2168 - High - CICS EXCI
      
  Substation ES 2.14.x now confirms support for CICS 5.6.
  With the mandatory changes in the DFHXCOPT all EXCI Calls from the 
  Substation ES region support the surrogate user requirements.
  


================================================================================
  Hotfix 04
  ---------
  
  
  RED-766 - Critical
  
  Storage for data stream transmit buffer is not freed at the end of
  CICS #RED transactions. This does not affect regions that mainly have
  long running #RED transactions.
  The result would be that CICS would eventually exhaust usable storage
  in the EDSA area.
  This has been fixed.
  
  
  RED-765 - Informational
  
  Missing error text for SXX8312 has now been updated.
  
  
  SSES-2165 - High
  
  When Substation is running with IMS, an incorrectly-coded call to a
  message-issuing routine resulted in an S0C4 abend.
  This has been fixed.



================================================================================
  Hotfix 03
  ---------
  
  SSES-2161 - High
  
  #RED tasks in CICS do not gracefully come down during shutdown.
  During CICS shutdown #RED transaction(s) do not respond to the PLT
  SXXOSHUT shutdown request(s). #RED transactions are forced to abend
  during shutdown.
  This has been fixed.
  
  
  SSES-2160 - Critical
  
  SXXO#RED messages from BPool addressability 31/64 bit.
  Previously if the interface values were not set correctly, #RED may terminate
  unexpectedly.
  Auto-detect now been correctly enabled and the issue has been resolved.


  SSES-2159 - Critical
  
  The Substation RED interface messages in BPool addressability 31/64 bit.
  Previously if the interface values were not set correctly, the Substation 
  Async/Triggers threads may terminate unexpectedly.
  Auto-detect now been correctly enabled and the issue has been resolved.  
  
  
  RED-762 and RED-756 - Critical
  
  Test for expired messages is incorrect and Substation ES reports
   7900 and 7901 errors.
  Modules SXXAX625, SXXAX221 and SXXAX222 have been changed to correct the
   expiry of messages in 31bit and 64bit buffer pools.
  This issue has now been resolved.
  
  
  RED-761 - Critical
  
  SXXAHUB abends with a S0C3 due to errors when reading parm file.
  When the Mainframe HUB starts up, it reads the parameters from
   DDNAME TIBPARM and when this operation fails a S0C3 is issued
   sometimes with fatal results when incorrect names are specified.
  This issue has now been resolved.


  RED-755 - Critical
  
  Module SXXAX820 will abend with S0C4 on certain API Leave requests.
  This issue has now been resolved.
  
  
  RED-754 - Critical
  
  SXX8137E error occurs even when buffer pool is not full.
  This issue has now been resolved.

  
  RED-753 - Critical
  
  Message Information Block (MIB) was overlaid during Send-with-Reply requests.
  This caused message SXX7950E with a header length of zero to be displayed.
  This issue has now been resolved.

  
  RED-752 - High
  
  Recovery module SXXARCV abends with a S0C1 during application or
   Substation Abends.
  This issue has now been resolved.

  
  RED-749 - Normal
    
  If message expiry time has not been specified, RED currently uses a
   value of 30 seconds. This change will take the specified timeout value
   and add 5 seconds for cross-memory and 10 seconds for XCF.

  
  SSES-2148 - High
  
  Remove Mainframe HUB requirement when using the EXCI interface.
  This dependency has been removed for v2.14.x
  
  
  SSES-2150 - Critical
  
  Under stress the Event List creates duplicate entries and message SXG2936W
   repeatedly reports incorrect values.
  This issue has now been resolved.
  
  SSES-2152 - Normal
  
  Message SXG1891I has been changed to show the RED trigger service name and more.
  When the trigger service trace level is set to a value higher than zero this
    message is displayed.
  
  
  

================================================================================
  Hotfix 02
  ---------

  SSES-2147 - High
  
  Logging to disk (VSAM) functions and the Wrap feature didn't work.
  This issue has now been resolved.
  Just a reminder the DISK functions will be deprecated in release 3.0.0.
  
  RED-751 - Critical
  
  Storage allocated increases for long-running applications.
  This issue has now been resolved.
  
  
  RED-747 - Critical
  
  Incorrect high-water mark of used buffer pool pages.
  Module SXXAX625 now calculates the number of target buffers currently
   being used correctly. Resolved.
  
  
  RED-746
  
  Message SXX8810E shows reason code as zero.
  This issue has been fixed and a valid reason code is displayed
  
  
  ================================================================================
  Hotfix 01
  ---------

  SSES-2111 - High

  When doing Request/Reply using containers and the reply requires more
  than 20 containers, #RED abends in CICS. #RED now allows now for 
  127 containers on reply.
  Corrected and fixed.


  SSES-2106 - Critical

  Function Obtain_ErrInfo abends on 0C4. Corrected and fixed.


  SSES-2095 - High  

  UoW updates for improved stress reporting and handling. Changed messages 
  SXG2131I and SXG2133W to include the current UoW allocation.
  

  SSES-2087 - CICS  

  Added new parameter <CorId (N,Y)> to SXC3I032 (SXT6) sample program.
   

  SSES-2080 - ESB Critical 

  Added new parameter for a RVDQ scheduler to set the completion time for 
  task scheduled for a worker. The parameter is RVDQ-SETCOMPTIME. 
  Valid values are 0 - 30 seconds. Zero (0) is the default.


  SSES-2075 - Critical      

  Substation ES now allows a trigger service using containers to include a 
  correlation ID container, where the output message will be sent by 
  Substation ES with JMSCorrelationID property for EMS, or tibss-CorrelationId 
  as a field for RV.


  SSES-2071 - Critical      

  Fixed Substation ES to allow Recipes with Method of Reply = 0 | 1 to be able  
  to forward the Correlation ID and the Service REPLY-TO value as separate 
  container fields to the BES application.