Application shows the “starting up” status in the Administrator GUI, whether it was started from a script or the GUI, but its microagent is not registered.

Application shows the “starting up” status in the Administrator GUI, whether it was started from a script or the GUI, but its microagent is not registered.

book

Article ID: KB0090922

calendar_today

Updated On:

Products Versions
TIBCO Administrator -
Not Applicable -

Description

Resolution:
In the application .tra file, check that the following parameters have been set correctly.

    Hawk.AMI.DisplayName:    This needs to be set in the following format:
        COM.TIBCO.ADAPTER.bwengine.<domain name>.<deployed name>.<process archive name>
    Hawk.Enabled        This needs to be set to true.
    Hawk.service         This needs to be set to the AMI service value. 
    Hawk.Network       This needs to be set to the AMI Network value Hawk.Daemon.    This needs to be set to the AMI Daemon value
        (check the domain hawkagent.cfg file to confirm what AMI values should be).

Issue/Introduction

Application shows the “starting up” status in the Administrator GUI, whether it was started from a script or the GUI, but its microagent is not registered.
Powered by Wolken Software