Examples of healthy RAID configurations for H1, H2 and H3 generation TIBCO LogLogic LMI appliance models
Article ID: KB0077103
Updated On:
| Products | Versions |
|---|---|
| TIBCO LogLogic Log Management Intelligence | n/a |
Description
Listed in the resolution section are examples of healthy (normal) RAID configurations from the $tw_cli show all command for each of the H1, H2 and H3 LogLogic appliance models.
Issue/Introduction
For easy reference this article contains the output from the tw_cli command to show examples of healty RAID configurations for 3 generations of LMI appliances.
Resolution
Platform: LX1000 and LX1010
$ tw_cli /c0 show all
Error: (CLI:003) Specified controller does not exist.
Platform: LX2000
$ /usr/sbin/tw_cli /c0 show all
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 OK - - 64K 447.149 ON -
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 149.05 GB 312581808 WD-WCAL92200185
p1 OK u0 149.05 GB 312581808 WD-WCAL92200347
p2 OK u0 149.05 GB 312581808 WD-WCAL92201328
p3 OK u0 149.05 GB 312581808 WD-WCAL92200350
Platform: LX2010
$ tw_cli /c0 show all
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
------------------------------------------------------------------------------
u0 RAID-10 OK - 64K 931.281 ON OFF OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 9QE7NDQ2
p1 OK u0 232.88 GB 488397168 9QE7T03E
p2 OK u0 232.88 GB 488397168 9QE7TAEP
p3 OK u0 232.88 GB 488397168 9QE7TB1E
p4 OK u0 232.88 GB 488397168 9QE7T07M
p5 OK u0 232.88 GB 488397168 9QE7T9DK
p6 OK u0 232.88 GB 488397168 9QE7W87A
p7 OK u0 232.88 GB 488397168 9QE7TETP
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 0 xx-xxx-xxxx
Platform: LX3000
$ /bin/tw_cli /c0 show all
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
------------------------------------------------------------------------------
…
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 76.33 GB 160086528 V20GTBRG
p1 OK u0 76.33 GB 160086528 V20GRSWG
p2 OK u2 233.76 GB 490234752 V5951WVG V
p3 OK u3 233.76 GB 490234752 V5907XQG V
p4 OK u4 233.76 GB 490234752 Y6422EGE
p5 OK u5 233.76 GB 490234752 Y6422G2E
p6 OK u6 233.76 GB 490234752 Y6695B5E
p7 OK u7 233.76 GB 490234752 Y6422EME
p8 OK u8 233.76 GB 490234752 V590A2BG V
p9 OK u9 233.76 GB 490234752 V594VH4G V
p10 OK u10 233.76 GB 490234752 Y642FCHE
p11 OK u11 233.76 GB 490234752 Y6422GME
Platform: ST2010
$ /bin/tw_cli /c0 show all
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
----------------------------------------------------------------------
u0 RAID-1 OK - - - 232.82 ON OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 5QE3WLAH
p1 OK u0 232.88 GB 488397168 5QE3WJPJ
p2 NOT-PRESENT - - - -
p3 NOT-PRESENT - - - -
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 255 22-Sep-2007
Note:
"NOT-PRESENT" is a normal output for a ST2010. It has a 4 port controller but only has 2 drives in a RAID-1 configuration. The other two drives are always missing.
Platform: ST3010
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 INITIALIZING - 81 64K 2793.91 ON OFF
u1 JBOD OK - - - 465.762 OFF OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 465.76 GB 976773168 9QG0Z2RB
p1 OK u0 465.76 GB 976773168 9QG0Z2PF
p2 OK u0 465.76 GB 976773168 9QG0Z2HY
p3 OK u0 465.76 GB 976773168 9QG0Z2D2
p4 OK u0 465.76 GB 976773168 9QG0Z2L3
p5 OK u0 465.76 GB 976773168 9QG0Z2NN
p6 OK u0 465.76 GB 976773168 9QG0SAC1
p7 OK u1 465.76 GB 976773168 9QG0Z2BE
$ tw_cli /c0 show all
Error: (CLI:003) Specified controller does not exist.
Platform: LX2000
$ /usr/sbin/tw_cli /c0 show all
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 OK - - 64K 447.149 ON -
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 149.05 GB 312581808 WD-WCAL92200185
p1 OK u0 149.05 GB 312581808 WD-WCAL92200347
p2 OK u0 149.05 GB 312581808 WD-WCAL92201328
p3 OK u0 149.05 GB 312581808 WD-WCAL92200350
Platform: LX2010
$ tw_cli /c0 show all
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
------------------------------------------------------------------------------
u0 RAID-10 OK - 64K 931.281 ON OFF OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 9QE7NDQ2
p1 OK u0 232.88 GB 488397168 9QE7T03E
p2 OK u0 232.88 GB 488397168 9QE7TAEP
p3 OK u0 232.88 GB 488397168 9QE7TB1E
p4 OK u0 232.88 GB 488397168 9QE7T07M
p5 OK u0 232.88 GB 488397168 9QE7T9DK
p6 OK u0 232.88 GB 488397168 9QE7W87A
p7 OK u0 232.88 GB 488397168 9QE7TETP
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 0 xx-xxx-xxxx
Platform: LX3000
$ /bin/tw_cli /c0 show all
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
------------------------------------------------------------------------------
…
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 76.33 GB 160086528 V20GTBRG
p1 OK u0 76.33 GB 160086528 V20GRSWG
p2 OK u2 233.76 GB 490234752 V5951WVG V
p3 OK u3 233.76 GB 490234752 V5907XQG V
p4 OK u4 233.76 GB 490234752 Y6422EGE
p5 OK u5 233.76 GB 490234752 Y6422G2E
p6 OK u6 233.76 GB 490234752 Y6695B5E
p7 OK u7 233.76 GB 490234752 Y6422EME
p8 OK u8 233.76 GB 490234752 V590A2BG V
p9 OK u9 233.76 GB 490234752 V594VH4G V
p10 OK u10 233.76 GB 490234752 Y642FCHE
p11 OK u11 233.76 GB 490234752 Y6422GME
Platform: ST2010
$ /bin/tw_cli /c0 show all
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
----------------------------------------------------------------------
u0 RAID-1 OK - - - 232.82 ON OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 5QE3WLAH
p1 OK u0 232.88 GB 488397168 5QE3WJPJ
p2 NOT-PRESENT - - - -
p3 NOT-PRESENT - - - -
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 255 22-Sep-2007
Note:
"NOT-PRESENT" is a normal output for a ST2010. It has a 4 port controller but only has 2 drives in a RAID-1 configuration. The other two drives are always missing.
Platform: ST3010
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 INITIALIZING - 81 64K 2793.91 ON OFF
u1 JBOD OK - - - 465.762 OFF OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 465.76 GB 976773168 9QG0Z2RB
p1 OK u0 465.76 GB 976773168 9QG0Z2PF
p2 OK u0 465.76 GB 976773168 9QG0Z2HY
p3 OK u0 465.76 GB 976773168 9QG0Z2D2
p4 OK u0 465.76 GB 976773168 9QG0Z2L3
p5 OK u0 465.76 GB 976773168 9QG0Z2NN
p6 OK u0 465.76 GB 976773168 9QG0SAC1
p7 OK u1 465.76 GB 976773168 9QG0Z2BE
Feedback
Yes
No
Powered by
