How to configure the Spotfire adapter to connect to Spotfire Server v7.9 or later

How to configure the Spotfire adapter to connect to Spotfire Server v7.9 or later

book

Article ID: KB0083908

calendar_today

Updated On:

Products Versions
TIBCO Streaming 7.7.0 and earlier

Description

The StreamBase Spotfire adapter fails to connect to Spotfire Server v7.9 or later.  The following output is seen in the console log:
  
2017-06-01 11:51:06.110-0400 [Thread- ThreadPool - 2] WARN SpotfireJob - Error processing request: Server returned HTTP response code: 405 for URL: http://spotfire.server.com/JobExecutor.asmx?op=LaunchJob2

This occurs after following the setup instructions in the Help under StreamBase Home > Adapters Guide > StreamBase Embedded Adapters > Spotfire Automation Services Output Adapter.​

Issue/Introduction

When the Spotfire adapter is configured according to the StreamBase Help, a 405 HTTP error code is seen when the adapter attempts to connect to a Spotfire Server v7.9 or later.

Resolution

To resolve this issue, append the '/spotfire' server directory to the 'Spotfire URL' field in the adapter's Properties tab (under the 'Connection' sub tab).  In the above example, the Spotfire URL was changed from..
  
http://spotfire.server.com

..to:
  
http://spotfire.server.com/spotfire

​
Powered by Wolken Software