Maximum Samples Stored
Article ID: KB0080709
Updated On:
| Products | Versions |
|---|---|
| TIBCO Data Virtualization | 7.0.5,7.0.6+ |
Description
What is configuration parameter Maximum Samples Stored
Issue/Introduction
Use age of configuration parameter "Maximum Samples Stored"
Resolution
This config settings is related to the memory graph.
The default is to sample every 6 seconds (10 samples per minute) and to keep 24 hours of samples, which is 14400 samples of history. When you show the graph, it displays 1000 samples, which is 100 minutes on the display. You can alter it to keep up to 5 days (120 hours) if you want, but if you increase this, you might want to decrease the sample period. You can increase the viewing range on Studio by just changing the maximum viewable entries. I think you may need to restart Studio after a change to this for it to take effect, but it appears to work properly.
The default is to sample every 6 seconds (10 samples per minute) and to keep 24 hours of samples, which is 14400 samples of history. When you show the graph, it displays 1000 samples, which is 100 minutes on the display. You can alter it to keep up to 5 days (120 hours) if you want, but if you increase this, you might want to decrease the sample period. You can increase the viewing range on Studio by just changing the maximum viewable entries. I think you may need to restart Studio after a change to this for it to take effect, but it appears to work properly.
Feedback
Yes
No
Powered by
