TIBCO Managed File Transfer Command Center/Internet Server 8.0.2 hotfix HF-002 is now available
Article ID: KB0102208
Updated On:
| Products | Versions |
|---|---|
| TIBCO Managed File Transfer Command Center | 8.0.2 |
Description
Hotfix TIB_mftccis_8.0.2_HF-002 can be downloaded from TIBCO Support Portal (https://support.tibco.com).
You will need to provide your TIBCO Support Portal credentials. Once logged in you can download the hotfix by selecting the “Downloads” -> “Hotfixes” option. Then go to “/AvailableDownloads/MFT/CommandCenter-InternetServer/8.0.2/” to download the hotfix.
The .zip file has the Readme file inside. Please unzip the file and review the Readme file for instructions on how to apply the hotfix.
Introduction
Hotfixes are cumulative. This is the second hotfix for TIBCO Managed File
Transfer Command Center 8.0.2 and TIBCO Managed File Transfer Internet
Server 8.0.2.
================================================================================
Closed Issues in 8.0.2_HF-002 (This Release)
The following issues are closed in this release:
MFCC-3782
When a file transfer request was made from an MFT Platform Server client to any
other back-end server, the following error message was received: "The system
cannot find the file specified."
MFCC-3777
During the hotfix installation, the Installer did not wait for the MFT Server
to stop.
MFCC-3776
When the virtual alias had multiple directories, directory downloads initiated
by Platform Server failed with the following exception: "String index out of
range."
MFCC-3773
A long running back-end AS2 upload displayed a DB exception on the checkpoint
record in the trace file. But the exception did not affect the upload.
MFCC-3764
For an incoming AS2 transfer issue with a partner, the following error message
was received: "Unable to verify content integrity: Message digest was
encrypted with unknown algorithm."
MFCC-3762
When adding a PGP or protocol key for a user with an '&' character in the
user ID, the following error message was received: "HttpParaInputFilter -
parameter checking violation has occurred" and the user authentication failed.
MFCC-3760
A memory leak in the SFTP server caused Out of Memory errors.
MFCC-3759
When a transfer was set to *LOCAL, an empty PPA trace file was generated for
each PPA executed.
MFCC-3755
Long running Platform Server transfers could fail because of a session timeout.
MFCC-3739
The LDAP group name associated with the LDAP authenticator right management got
corrupted if the LDAP group name contained a space.
MFCC-3734
When the LDAP authenticator was refreshed after the admin user clicked the
update button, all the group rights were removed except the ones that were
edited.
MFCC-3706
When a client initiated FTPS SSL negotiation to MFT hung, subsequent FTPS
requests also timed out.
MFCC-3695
When FTP/FTPS StartThread received an Out of Memory error, the FTP service
failed. Note: When executing FTP/FTPS on UNIX, set the Max User Process limit
(ulimit -u) to 4096 or 8192.
MFCC-3666
MFT FTP server support was added for FTP client command: "OPTS UTF8 ON".
MFCC-3652
Disabled scheduler jobs logged a start message but did not log a completion
message.
MFCC-3651
Command Center initiated platform transfers did not specify a TCP timeout.
MFCC-3644
When an SSH client upload was cancelled, the Internet Server audit record
indicated Success and the Success PPA was executed.
MFCC-3641
When the connection manager server received an Out of Memory error (caused by
exceeding the process count limit on Linux), a dead command channel was left in
the open connections.
MFCC-3629
An LDAP user's department was synchronized even if the department did not exist
in the MFT database.
MFCC-3626
For JMS initiated platform transfers, the time needed to retrieve the transfer
status took longer on high volume Platform Servers.
MFCC-3625
When an admin user clicked Reports -> View Active Transfers, the error
"java.lang.NullPointerException" was received.
================================================================================
Closed Issues in 8.0.2_HF-001
The following issues were closed in this release:
MFCC-3630
When using Connection Manager with a high volume of transfers, the
DB connections that were used increased.
MFCC-3619
JMS initiated Platform Transfers with TransferStatusCheck=YES took longer to
complete if many transfers were executed throughout the day.
A new value, WAIT, was added to the JMS XML parameter TransferStatusCheck.
WAIT: Wait for the transfer to complete without polling the Platform Server.
MFCC-3613
Connectivity and network errors occurred when many (400+) JMS transfer requests
were initiated at the same time.
A new web.xml parameter, TransferJMSThreadPoolSize, was added. The value
defined for the parameter will throttle the number of concurrent threads created
as the result of data received from JMS. The default value of 100 will throttle
the number of JMS Initiated threads to 100. This includes both Internet Server
and Platform Server initiated JMS transfer requests.
<context-param>
<param-name>TransferJMSThreadPoolSize</param-name>
<param-value>100</param-value>
</context-param>
Note: The maximum number of threads actually created may be exceeded by one or
two threads due to the timing of creating and counting Java threads.
MFCC-3612
Intermittent SSH connection failures occurred when the partner server used a
DSA SSH key.
MFCC-3603
When the user executed the Platform CLI "GetTransferFromBank", the value
returned for RIPName was invalid.
Note: A change was made in the Platform Command Line Interface. To implement
the change, you must copy the following file to the Platform Command Line
Interface installation directory:
<MFT Install>/distribution/PlatformTransfer/ClientCommon.jar
MFCC-3587
A user with HelpDeskRight could not update a password for a user with
administrative rights.
MFCC-3579
When creating a PGP system key, a user could not select multiple hashing
algorithms.
MFCC-3578
The scheduler "Purge Log Files" received an exception if the trace directory
name or location was changed.
MFCC-3558
Upgraded Tomcat to v8.0.47.
MFCC-3508
The "Recipient(to)" field for email on the Add Alert and Update Alert pages
allowed only 64 characters. The size restriction did not allow multiple
email ids to be added when configuring an email alert.
MFCC-3505
sFTP transfers to MFTIS v7.3.1 encountered connection failures with Key
Exchange Algorithm: ecdh-sha2-nistp521.
MFCC-3446
Intermittent Platform Server transfers to Internet Server failed, but the
Internet Server transfer was successful.
MFCC-3394
Error "Session Not Found" was received when an FTP upload was performed and
the QUIT command was received on the control connection before the transfer
completed.
You will need to provide your TIBCO Support Portal credentials. Once logged in you can download the hotfix by selecting the “Downloads” -> “Hotfixes” option. Then go to “/AvailableDownloads/MFT/CommandCenter-InternetServer/8.0.2/” to download the hotfix.
The .zip file has the Readme file inside. Please unzip the file and review the Readme file for instructions on how to apply the hotfix.
Introduction
Hotfixes are cumulative. This is the second hotfix for TIBCO Managed File
Transfer Command Center 8.0.2 and TIBCO Managed File Transfer Internet
Server 8.0.2.
================================================================================
Closed Issues in 8.0.2_HF-002 (This Release)
The following issues are closed in this release:
MFCC-3782
When a file transfer request was made from an MFT Platform Server client to any
other back-end server, the following error message was received: "The system
cannot find the file specified."
MFCC-3777
During the hotfix installation, the Installer did not wait for the MFT Server
to stop.
MFCC-3776
When the virtual alias had multiple directories, directory downloads initiated
by Platform Server failed with the following exception: "String index out of
range."
MFCC-3773
A long running back-end AS2 upload displayed a DB exception on the checkpoint
record in the trace file. But the exception did not affect the upload.
MFCC-3764
For an incoming AS2 transfer issue with a partner, the following error message
was received: "Unable to verify content integrity: Message digest was
encrypted with unknown algorithm."
MFCC-3762
When adding a PGP or protocol key for a user with an '&' character in the
user ID, the following error message was received: "HttpParaInputFilter -
parameter checking violation has occurred" and the user authentication failed.
MFCC-3760
A memory leak in the SFTP server caused Out of Memory errors.
MFCC-3759
When a transfer was set to *LOCAL, an empty PPA trace file was generated for
each PPA executed.
MFCC-3755
Long running Platform Server transfers could fail because of a session timeout.
MFCC-3739
The LDAP group name associated with the LDAP authenticator right management got
corrupted if the LDAP group name contained a space.
MFCC-3734
When the LDAP authenticator was refreshed after the admin user clicked the
update button, all the group rights were removed except the ones that were
edited.
MFCC-3706
When a client initiated FTPS SSL negotiation to MFT hung, subsequent FTPS
requests also timed out.
MFCC-3695
When FTP/FTPS StartThread received an Out of Memory error, the FTP service
failed. Note: When executing FTP/FTPS on UNIX, set the Max User Process limit
(ulimit -u) to 4096 or 8192.
MFCC-3666
MFT FTP server support was added for FTP client command: "OPTS UTF8 ON".
MFCC-3652
Disabled scheduler jobs logged a start message but did not log a completion
message.
MFCC-3651
Command Center initiated platform transfers did not specify a TCP timeout.
MFCC-3644
When an SSH client upload was cancelled, the Internet Server audit record
indicated Success and the Success PPA was executed.
MFCC-3641
When the connection manager server received an Out of Memory error (caused by
exceeding the process count limit on Linux), a dead command channel was left in
the open connections.
MFCC-3629
An LDAP user's department was synchronized even if the department did not exist
in the MFT database.
MFCC-3626
For JMS initiated platform transfers, the time needed to retrieve the transfer
status took longer on high volume Platform Servers.
MFCC-3625
When an admin user clicked Reports -> View Active Transfers, the error
"java.lang.NullPointerException" was received.
================================================================================
Closed Issues in 8.0.2_HF-001
The following issues were closed in this release:
MFCC-3630
When using Connection Manager with a high volume of transfers, the
DB connections that were used increased.
MFCC-3619
JMS initiated Platform Transfers with TransferStatusCheck=YES took longer to
complete if many transfers were executed throughout the day.
A new value, WAIT, was added to the JMS XML parameter TransferStatusCheck.
WAIT: Wait for the transfer to complete without polling the Platform Server.
MFCC-3613
Connectivity and network errors occurred when many (400+) JMS transfer requests
were initiated at the same time.
A new web.xml parameter, TransferJMSThreadPoolSize, was added. The value
defined for the parameter will throttle the number of concurrent threads created
as the result of data received from JMS. The default value of 100 will throttle
the number of JMS Initiated threads to 100. This includes both Internet Server
and Platform Server initiated JMS transfer requests.
<context-param>
<param-name>TransferJMSThreadPoolSize</param-name>
<param-value>100</param-value>
</context-param>
Note: The maximum number of threads actually created may be exceeded by one or
two threads due to the timing of creating and counting Java threads.
MFCC-3612
Intermittent SSH connection failures occurred when the partner server used a
DSA SSH key.
MFCC-3603
When the user executed the Platform CLI "GetTransferFromBank", the value
returned for RIPName was invalid.
Note: A change was made in the Platform Command Line Interface. To implement
the change, you must copy the following file to the Platform Command Line
Interface installation directory:
<MFT Install>/distribution/PlatformTransfer/ClientCommon.jar
MFCC-3587
A user with HelpDeskRight could not update a password for a user with
administrative rights.
MFCC-3579
When creating a PGP system key, a user could not select multiple hashing
algorithms.
MFCC-3578
The scheduler "Purge Log Files" received an exception if the trace directory
name or location was changed.
MFCC-3558
Upgraded Tomcat to v8.0.47.
MFCC-3508
The "Recipient(to)" field for email on the Add Alert and Update Alert pages
allowed only 64 characters. The size restriction did not allow multiple
email ids to be added when configuring an email alert.
MFCC-3505
sFTP transfers to MFTIS v7.3.1 encountered connection failures with Key
Exchange Algorithm: ecdh-sha2-nistp521.
MFCC-3446
Intermittent Platform Server transfers to Internet Server failed, but the
Internet Server transfer was successful.
MFCC-3394
Error "Session Not Found" was received when an FTP upload was performed and
the QUIT command was received on the control connection before the transfer
completed.
Issue/Introduction
TIBCO Managed File Transfer Command Center/Internet Server 8.0.2 hotfix HF-002 is now available
Environment
All supported environments
Feedback
Yes
No
Powered by
