Hotfix CW02038 can be downloaded from TIBCO Support Portal (https://support.tibco.com).  
 
You will need to provide your TIBCO Support Portal credentials.  Once logged in you can download the hotfix by selecting the “Downloads” -> “Hotfixes” option. Then go to “/AvailableDownloads/MFT/ PlatformServer/Windows/7.1.1/” to download the hotfix.
 
The .zip file has the Readme file inside. Please unzip the file and review the Readme file for instructions on how to apply the hotfix.
 
Introduction
 
Hotfixes are cumulative. This hotfix is for TIBCO Managed File
Transfer Platform Server for Windows 7.1.1.
 
================================================================================
Closed Issues in CW02038 (This Release)
 
The following issues are closed in this release:
 
PSW-704
MFT Platform Server Administrator crashes when clicking on Transfer if scheduled
transfers are configured.
 
================================================================================
Closed Issues in CW02037
 
The following issues were closed in the CW02037 release:
 
PSW-680
Intermittent Server crashes when Send Directory failed with "No files
to send or receive"
 
================================================================================
Closed Issues in CW02026
 
The following issues were closed in the CW02026 release:
 
PSW-517
Receive intermittent core dumps when incoming connections are established and
the Node definition Description parameter contains the word "Server"
 
================================================================================
Closed Issues in CW02022
 
The following issues were closed in the CW02022 release:
 
PSW-503
Responder Reverse DNS lookup takes four or five seconds to complete
 
PSW-499
When executing on Chinese Windows, transfers of a file with many Chinese
characters in the file name fails with error:
"ANSI to UNICODE data failed while parsing info packet"
 
PSW-498
Exception and core dump produced when a DNI scheduled transfer executed when
daylight savings time changed to and from daylight savings time.
 
PSW-494
Intermittent exception received and core dump written when network error
occurs during file transfer termination.
 
PSW-316
Transfer did not retry when transfer failed because file was in use.
 
================================================================================
Closed Issues in CW02007
 
The following issues were closed in the CW02007 release:
 
PSW-309
Resolves the error "Convert ANSI to UNICODE data failed while parsing info
packet" when Windows Platform Server initiates a transfer to a UNIX system
and the remote file name contains double byte characters.
 
PSW-308
Resolves a problem where a Directory list request returns invalid data when
no files are found.
 
PSW-304
Resolves a problem where MFT Command Center Transfer Non-Event Processing will
not work when the Platform Server time is in a different time zone or has a
different system time.
 
PSW-303
Resolves an intermittent problem where the MFT Command Center Collector can
miss collecting an audit record from Platform Server when a transfer executes
a synchronous PPA.
 
================================================================================
Closed Issues in CW02000
 
The following issues were closed in the CW02000 release:
 
PSW-273
Resolves a problem on "DNI Receive" when remote files have non-ASCII file names.
Non-ASCII file names will be ignored and a record will be written to the
MFT Monitor.  Support for non-ASCII files names will be added in a future release.
 
PSW-272
Resolves a problem on directory receives when files with non ASCII file names
are present. The non ASCII file names are ignored and the ASCII file names can
be transferred twice. After applying this fix, the ASCII filenames are received
once and non ASCII filenames will report as "Failed to receive". 
 
PSW-269
Resolves a problem where ftmsmgr can crash while displaying many templates.
 
PSW-266
Resolves a problem when viewing past transactions. When the Event log has an
event where the string error message is greater than 255 characters in length,
the MFT Platform Server Administrator can crash.
 
PSW-257
Update the default TCP Send and Receive Window buffer size to 256000.
 
================================================================================
Closed Issues in CW01993
 
The following issues were closed in the CW01993 release:
 
PSW-216
Upgrade to OpenSSL 0.9.8zf
 
PSW-215
Resolves an invalid handle error when a Remote Command is sent to Windows
Platform Server with an "&" at the end.
 
================================================================================
Closed Issues in CW01981
 
The following issues were closed in the CW01981 release:
 
PSW-64 Resolves a problem where there was no way to specify Failure
Disposition Retry with DNI.
 
================================================================================
Closed Issues in CW01978
 
The following issues were closed in the CW01978 release:
 
PSW-202
Resolves a problem where FTP Size command to MFTIS to PS with CW01945 and
above fails.
 
================================================================================
Closed Issues in CW01972
 
The following issues were closed in the CW01972 release:
 
PSW-198
MFT Platform Client requires the TLS protocol when initiating an SSL connection
to MFT Platform Server
 
PSW-191
Resolves a problem where cfdir requests to a UNC drive can be delayed by 10
seconds.
 
PSW-186
Resolves a problem decoding invalid UTF8 characters in the file name. If the
remote file name contains invalid UTF8 characters, MFT will continue the
transfer and will append '.cannot.decode' to this file name. If the local file
name (i.e. Windows file name) contains invalid UTF8 characters, the transfer
will fail.
 
================================================================================
Closed Issues in CW01945
 
The following issues were closed in the CW01945 release:
 
PSW-181
Resolves a problem sending a folder containing a sub-directory  containing files
from an FTP client through Internet Server to Windows Platform Server and
writing to a UNC path. The FUSUTIL utility was not creating a directory.
 
PSW-177
Resolves a problem where ftmscmd command can hang.
 
PSW-171
Resolves a problem with Unicode Charactes in Log.txt and Collector Requests on
PS Windows.
 
PSW-161
Resolves a problem when transferring files with Unicode file names.
 
PSW-160
Resolves a problem sending a ftmscmd transfer command containing a PPA action
from z/OS MFTPS to Windows MFTPS the ftmscmd transfer fails.
 
PSW-159
Resolves the following error when executing FTMSCMD.EXE with file names that
contain unicode characters:
 
Partner issued message:
Could not execute QzpcV2luZG93c1xzeXN0ZW0zMlxjbWQuZXhlIC9lOm9uIC9jIG1rZGlyICJDOlxUZW1wXGHDpCI=
 
PSW-158
Resolves a problem when RIJN(AES) encryption is selected for the node
definition and the audit log shows Encryption Type N/A.
 
================================================================================
Closed Issues in CW01918
 
The following issues were closed in the CW01918 release:
 
PSW-148
Update to enable FTMSCMD with the /STATUS option to pipe active transfer status.
 
PSW-141
Resolves a problem where running a Platform Server for Windows DNI with multiple
Post Processing Actions, can cause mini dumps to be written.
 
PSW-133
Resolves a buffer overflow problem when transferring a large file using the
command line FTMSCMD with the /STATUS option.
 
PSW-130
Resolves a problem where using token $(SDIR)\$(LocalFileName) instead of
\$(SDIR)\$(LocalFileName) could corrupt the pqf file and crash the MFTPS service.
 
PSW-128
Resolves a problem where the RemoteCTFile and LocalCTFile in node configuration
is ignored when transfers are initiated by Command Center.
 
================================================================================
Closed Issues in CW01906
 
The following issues were closed in the CW01906 release:
 
PSW-127
Resolved a problem where scheduled transfers were scheduled to run one hour
later after moving on to daylight savings time.
 
PSW-126
Resolved a problem where the line feed delimiter value "LF" was not preserved
in the audit record.
 
PSW-125
Updated the OpenSSL modules to version OpenSSL 0.9.8y-fips.
 
PSW-117
Modified FUSUTIL so that delete option works for both file and empty directory. 
Rename option now works for both file and directory.
 
PSW-103
Improved transfer speed by increasing the size of the Windows socket send and
receive buffers.
 
PSW-102
Resolved a problem where the Remove Trailing Spaces parameter did not work when
executing a platform transfer from Command Center.  The field is also now
included in the audit record and collected audit records on Command Center
correctly report the Remove Trailing Spaces value.
 
PSW-100
Increased the maximum User ID length from 20 to 64 bytes in the cfprofile,
audit record and IS collector requests.
 
================================================================================
Closed Issues in CW01896
 
The following issues were closed in the CW01896 release:
 
1. Resolves a problem where scheduled DNI and scheduled transfers can deviate
from the scheduled interval.
 
2. Updated the event viewer message from error to warning on a directory
listing when the file does not exist.
 
3. Resolved a problem where scheduled transfers were scheduled to run one hour
earlier after moving off of daylight savings time.
 
================================================================================
Closed Issues in CW01893
 
The following issues were closed in the CW01893 release:
 
1. Resolves a problem where directory list requests return files only if MFT
Platform Server has read and write access.  The following registry entry must
be added to return all files with read access:
 
   HKEY_LOCAL_MACHINE\SOFTWARE\....\Proginet\CyberFusion Server\QueueManagerService\ListDirectoryAccess
 
Create ListDirectoryAccess as a string value.  If the value is “Shared”, the
file name will be returned if READ access is available. If entry does not exist
or has any other value, the file name will be returned only if READ and WRITE
access is available. “Exclusive” is the default access.
 
Note: Setting ListDirectoryAccess to a value of “Shared” should not be done in
the following environment:
 
Another Platform Server initiates a DNI receive to this server and the disposition
is move or delete. In situations like this where the file is transferred and
Platform Server does not have write access, the move or delete may fail and the
file would be retransmitted.
 
2. Resolves a problem with DNI receive where subfolders were not being created
for UNC drives.  The Event Viewer message "The specified path is invalid" was
written.
 
3. Resolves a problem on the Platform Server Administrator where double
clicking on a DNI template or initiation directory did not open the properties
window.
 
4. Improved the informational message displayed in the Event Viewer when the
"Failed to open transaction audit" error occurs.
 
================================================================================
Closed Issues in CW01882
 
The following issues were closed in the CW01882 release:
 
1. Audit records for transfers containing a remote DomainName\UserId have been
updated to report the domain name correctly.
 
2. Resolves a problem when using MFT Command Center Audit Poll for a specific
transfer user.  All records for all users were being returned.
 
3. Resolves a problem when a user is not in the cfbrowse or cfadmin groups and
the user specifies the LocalUser parameter.  cfinq incorrectly returned all
transfers for the logged on user.  cfinq now returns no transfers.
 
4. Increased the number of characters allowed in a remote command to support up
to 240 characters.
 
5. Resolves an error when MFT Platform Server for Windows initiates an upload or
download to MFT Internet Server, and the filename contains extended ASCII
characters.
Note: cfinq and ftmscmd do not display extended ASCII characters correctly due
to a limitation in Windows.
 
6. Resolves the following error when sending a file with a size of exactly 4075
bytes or a multiple of 4075 bytes and AES encryption is enabled:
   Reason: Write file failed.  The supplied user buffer is not valid for the
           requested operation.
 
7. Resolves a problem where transfers were retried immediately after a
temporary error when using FTMSCMD and specifying the /TC (/TryCount) parameter. 
The following parameter can now be used to define the interval between retries:
   /TI (/TryInterval)      Defines the # of seconds between retries: Default=60. 
Note: This parameter will apply only to requests initiated through FTMSCMD that
are not submitted to the Server.  Transfers initiated through the Server are
retried at the next dispatch interval.

TIBCO Managed File Transfer Platform Server for Windows 7.1.1 hotfix CW02038 is now available

All supported environments