Resolution:
Description:
============
How to clearly define the differences between the folloiwng 2 properties for BusinessEvents FT situations:

1).  Engine.FT.UseFT
2).  be.ft.enabled

Environment:
============
All

Symptoms:
========
Not applicable

Cause:
========
Not applicable

Resolution:
===========

Enabling  FT in BusinessEvents(BE) using the system property "Engine.FT.UseFT" rather than "be.ft.enabled" causes BusinessWorks(BW)  to go into FT mode as BW also utilizes the same property.

Use the following properties so that Engine.FT.UseFt related properties are disabled.

be.ft.enabled = true
be.ft.cluster.name = ft_group_name
#&ltinteger> < lower the number the higher the priority.>
#be.ft.priority = 1
#Engine.FT.UseFT = true
#Engine.FT.GroupName = ft_group_name
#&ltinteger> < lower the number the higher the priority.>
#Engine.FT.Weight=100

Implications of using"Engine.FT.UseFT" rather than "be.ft.enabled" in Fault Tolerance(FT).