Description:
CZ01903 is a cumulative hotfix that resolves defects and includes defects resolved in prior hotfixes.  It supersedes all prior hotfixes for release 7.1.0.

Defects fixed in CZ01903:
PSZ-41: Platform transfers initiated by Command Center fail when using a Responder Profile on z/OS
PSZ-38: Resolves a 0E0 abend in module FUSASEND when Access Register 1 is corrupted by 3rd party software.
PSZ-37: Resolves a problem when an error message is received from a transfer partner that exceeds 120 bytes, the message displayed is truncated at 120 bytes.
PSZ-35: Display a more descriptive message when abend 913-34 is received.
PSZ-34: Resolves problems with the following parameters when collected by MFT Command Center: Delimiter(LF) and Type (Text/Binary).
PSZ-33: Resolves a problem where Active and Inactive transfers were incorrectly returned on the ISPF "Manage File Transfers" page when the Remote Transaction Number was entered.
PSZ-32: Resolves a problem where message "PGT1002I" is displayed when initiating a request to a Windows Platform Server.
PSZ-31: Resolved problem on the ISPF Transfer Audit detail page where the Compressed Byte count is displayed incorrectly when the compressed byte count exceeds 2GB.
PSZ-25: Added support to the FUSUTIL utility to DELETE or RENAME migrated datasets.
PSZ-22: Resolved a problem with managing a z/OS Platform Server from Command Center when the z/OS password has lower case characters.
PSZ-16: Adds new Transfer parameter: CRLF=USSLF. This parameter allows you to send a z/OS DSN to a z/OS USS file and terminate the USS file records with an ASCII LF (0x0A).
PSZ-13: Resolved a problem where message PGTM7247E was incorrectly issued when the local file name was too long.
PSZ-8 : Resolved a problem with corrupted data when the following parameter is specified:
        SENDRECFMU=NOBDW
        This parameter is now restricted to files with RECFM=V or VB.  If this parameter is used on a file with a different RECFM value, the transfer will be terminated with an error.

Defects fixed in CZ01900:
PSZ-8 : Added a new value to the batch SENDRECFMU parameter: NOBDW
  SENDRECFMU={YES|NO|NOBDW}   Default=NO
  : When YES is specified for a SEND, the file will be opened using RECFM=U.  Each block will be written as an individual record.  The main usage of this parameter is to retain the RECFM=VB block and record structure when sending to a UNIX or Windows platform.
  : When NOBDW is specified for a SEND, the file will be opened using RECFM=U.  Each block will be written as an individual record.  This parameter is the same as YES, except that the BDW is not sent.
  Note: This parameter should only be used when TYPE=BINARY is specified

Defects fixed in CZ01874:
: Default for EMAILSUBGOOD and EMAILSUBFAIL incorrectly references token #(TR).  The correct token is #(TID).
: 0C4 abend at OSISGLBL+ADC0 occurs when trying to display message PGTS1502I at startup
: XCOMJOB alias for member FUSXJOB was corrupted
: When queuing transfers through Cross memory and using the LOCAL_USER (LUSER) parameter, the authorization check is incorrectly performed against the user that submitted the request, sometimes resulting in an Authorization error.
: Added new batch parameter:
  SENDRECFMU={YES|NO|NOBDW}   Default=NO
  When YES is specified for a SEND, the file will be opened using RECFM=U.  Each block will be written as an individual record.  The main usage of this parameter is to retain the RECFM=VB block and record structure when sending to a UNIX or Windows platform. When NOBDW is specified for a SEND, the file will be opened using RECFM=U.  Each block will be written as an individual record.  This parameter is the same as YES, except that the BDW is not sent.
  Note: This parameter should only be used when TYPE=BINARY is specified
: ISPF Local File Name was translated to upper case incorrectly.  This caused problems when transmitting HFS files.

Defects fixed in CZ01871:
: Resolves a dynamic allocation error when VSAM MAXLRECL > 32760.  Transfers will now fail if the VSAM MAXLRECL is > 32760.
: 0C4 abend received under following circumstances:
  : Transfer is using compression
  : Transfer starts sending compressed bytes
  : Transfer terminates with an error

Defects fixed in CZ01869:
: Fixes a problem where PPA defined in DNI members enabled at startup only get executed for the first DNI member enabled. If you disable and enable the DNI member, PPA is executed.
: Resolves an 0C4 abend when the VSAM MAXLRECL is > 32760.  Transfers will now fail if the VSAM MAXLRECL is > 32760.

Defects fixed in CZ01866:
: Resolves a loop that occurs under the following conditions:
  : Send a PDS or PDSE with a wildcard in the local file name
  : The Sender is not authorized to access the input dataset


Module(s) Affected:
                     DNICONFG FUSARECV FUSASEND FUSASNAR
                     FUSATERM FUSCFINQ FUSCFOPR FUSEMAIL
                     FUSIONIO FUSOPER  FUSTB001 FUSTLV
                     FUSUTIL  FUSXJOB  OSIADIR0 OSIMSGS
                     OSINBDAP OSISGLBL OSIUB000 OSIUX000
                     XCOMJOB*
                     * Note that XCMOJOB is an alias of FUSXJOB
Exec(s) Affected:    FUSION
Panel(s) Affected:   OSICE021 OSICE301 OSICE504

Please contact TIBCO Support to download this hotfix.

TIBCO Managed File Transfer Platform Server for z/OS hotfix CZ01903 is now available

Product: TIBCO Managed File Transfer Platform Server for z/OS Version: 7.1.0 OS: --------------------