TIBCO Managed File Transfer Command Center/Internet Server 7.3.0 hotfix HF-004 is now available
Article ID: KB0103333
Updated On:
| Products | Versions |
|---|---|
| TIBCO Managed File Transfer Internet Server | - |
| Not Applicable | - |
Description
Description:
Hotfix TIB_mftccis_7.3.0_HF-004 can be downloaded from the TIBCO Support Managed File Transfer Server- mft.tibco.com.
Server name: mft.tibco.com
Credentials: Use your TSC (TIBCO Support Central website) login.
Browser: https://mft.tibco.com
FTP: port 21
SFTP: port 22
Once logged on you can find the hotfix under " /AvailableDownloads/MFT/CommandCenter-InternetServer/7.3.0/ "
The .zip file has the Readme file inside. Please unzip the file and review the Readme file for instructions on how to apply the hotfix.
Closed Issues in 7.3.0_HF-004 (This Release)
MFCC-2900
A department user with UpdatePGPKeyRight could not add PGP public key.
MFCC-2887
When executing a scheduler job to upload a file from Internet Server to LOCAL
server, if the LOCAL server enabled PGP encryption, the transfer was successful
but the file was not PGP encrypted.
MFCC-2876
When uploading a file through an SCP client to a Linux SSH server, if the file
size was greater than 1 GB, the transfer failed intermittently.
*Note: There is an issue with some SSH clients, including FileZilla. When an
SSH transfer takes longer to complete than the SessionTimeout value defined
in the web.xml file, the SFTP client may incorrectly display the following
messages:
"Server sent disconnect message"
"Idle connection"
The transfer execution is not impacted and other transfers can execute after
this message is displayed.
MFCC-2866
Explicit SSL Uploads and Downloads intermittently failed when the user or
transfer definition required secure client protocol.
MFCC-2861
Upgraded Tomcat Server to version 8.0.33.
MFCC-2860
When accessing the JAVA client with SSO, if you clicked the Upload or Download
button, a session error was displayed.
MFCC-2850
When you were assigned only the ViewPGPKeyRight right, the admin page did not
show the Administration tab.
MFCC-2834
When executing a BW5 process to upload a file from Internet Server to an EMS
queue, if the queue did not exist, the transfer froze.
MFCC-2833
When using BW to upload a file to an EMS queue, if the file defined in
the JMSNameorFilePath field was not found, an EMS Connection leak occurred.
MFCC-2753
When BW issued a SOAP call, MFT added an empty line to the return array. This
empty entry caused a BW error.
MFCC-2694
When issuing an FTP size command through a FileZilla client to a remote
platform server on Windows, the command failed.
MFCC-2351
When creating a new transfer from an existing transfer definition, the
SSH key assigned to the existing transfer definition did not show in the SSH
System Key drop-down box.
Closed Issues in 7.3.0_HF-003
MFCC-2680
Starting AS2 and RocketStream services might fail because of license key validation error.
MFCC-2677
When a browser user logged into MFT Internet Server through HTTPS Certificate
Authentication, the user ID was missing on browser, java and thin clients.
MFCC-2670
Certificate authentication did not work for the browser client.
MFCC-2669
Private users assigned to a department could not update transfers assigned to
their department.
MFCC-2656
Scheduled Platform Transfer or Internet Transfer job did not kick off dependent
Platform Transfer or Internet Transfer job.
MFCC-2642
Added LDAPSyncUser SOAP call that was removed in MFT 7.3.0.
MFCC-2641
Upgraded JQuery JavaScript library to release 1.12.0.
MFCC-2634
When the Department, Email Address and Phone Number attributes were not managed
by LDAP, MFT admin could not change these fields on the Update User page.
MFCC-2629
Installer looped and ran out of memory when hotfix was installed and the MFT
HTTP port was not available.
MFCC-2617
When the Allow User to Add PGP Key flag was set to yes for a transfer user, if
the user updated a PGP key through the browser client, an incorrect message
indicating unable to update cache was displayed.
MFCC-2605
MFT incorrectly updated the DB password for an LDAP user when Update User was
initiated by a SOAP call.
MFCC-2597
When receiving a directory from Internet Server to a Windows or UNIX platform
server, if ? wildcard was used in the remote file name, the transfer failed.
MFCC-2582
When executing a Platform Server Command alert to a platform server configured
to use FIPS 140, the command execution failed.
MFCC-2576
When adding a Download definition for an SSH Server, FTP Server or Platform
Server, if a PPA command was defined, you could not retrieve the file list
through the Browser, FTP, SFTP or Platform Server clients.
MFCC-2566
After entering a 4 digit port for a platform node, a zero got added at the
beginning. For example, 07664.
MFCC-2485
When a platform server initiated a download transfer from Internet Server, the
message returned when the file did not exist was misleading.
MFCC-2481
Search Audit failed when Server Name, Transfer Status, Node Name, or Department
were used as the selection criteria.
MFCC-2453
When the Client Protocols Allowed value was set to Secure in the User or
Transfer definition, Platform Server SSL requests were rejected.
MFCC-2447
Check if user Scheduler has the proper rights when adding and updating an
alert with Job Type of Internet Transfer or Platform Transfer.
Closed Issues in 7.3.0_HF-001
MFCC-2506
Key Authentication did not work when using an SFTP client to connect with MFT
server.
MFCC-2496
When using an SFTP client to connect with MFT SSH Server, an Internet Server
error was reported in the catalina.out file.
MFCC-2442
When using a SecureBridge client to connect with the SSH server, if you clicked
a directory, an error was displayed indicating that the file attributes data
was unsupported.
MFCC-2438
Add the Trace Vector Table information at the end of the diagnostic information,
including the date and trace file name.
MFCC-2421
When you attempted to perform a platform server manual poll, ViewAuditRight was
required in addition to FTAdminRight.
MFCC-2417
When you executed a Non-Event Transfer Alert, the input for the following
fields was ignored.
:Client File Name
:Process Name
:Transfer Description (UserData)
MFCC-2414
When creating alerts by using the Add From Existing Alert function, if you
expanded the Selection Criterion section on the Add From Existing Alert page,
the corresponding alert type was not pre-selected, and all types of alerts were
displayed in the Results table.
MFCC-2413
When executing a file download transfer from a remote SSH/FTP server to a
platform server, if the connection to the remote SSH/FTP server was interrupted
during the transfer, the Internet Server audit report collected from the
platform server suggested that the transfer was successful.
MFCC-2409
After executing a platform server transfer, the User Data input was not
maintained after you clicking the Resubmit button from the Audit Details page.
MFCC-2407
After doing an FTP download trasfer from a Linux platform server 7.1 to
FileZilla through Internet Server 7.2.4, newly created file showed the
incorrect time stamp.
MFCC-2402
From the Delete Audits page, a department administrator was able to delete the
audit records that did not belong to the department.
MFCC-2401
When a department administrator clicked the search button on the Manage
Platform Transfers page, all the platform server transfers intead of only the
ones assigned to the department were displayed.
MFCC-2400
If MFT Command Center was installed on a case-sensitive mySQL server, after
adding a Purge DB Tables job from the Scheduler page, the Delete Login Audit
job failed.
MFCC-2398
After running a platform server transfer or Internet Server transfer, the
notification email set for the transfer were not sent.
MFCC-2389
On the Manage Alerts page, if you searched enabled transfer alerts with another
non-default selection criteria, the alerts created in MFT 7.2.5 were
returned incorrectly in the result table.
MFCC-2381
After clicking the View Report button on the Check Database Reports page,
the user ID instead of the user name was displayed at the top of the
Select Report Parameters page.
MFCC-2379
After you clicking the update button on the configure JMS Service page, an
error message indicating "User Name must have a value" popped up.
MFCC-2377
MFT Command Center did not support sending emails to an SMTP server that
required SSL/TLS.
The following weblxml parameter is added to turn SSL/TLS support on/off.
The valid values are true or false.
<context-param>
<param-name>SmtpTLSEnabled</param-name>
<param-value>false</param-value>
</context-param>
MFCC-2376
When MFT Internet Server ran out of transaction ID values, the transaction
number was stuck at ZZ999.
MFCC-2373
Alerts created in MFT Command Center 7.2.5 were missing from the searching
results of enabled transfer events on the Manage Alerts page.
MFCC-2370
If MFT Command Center was installed using an MSSQL, DB2, or Mysql database,
Non-Event Alert did not work properly for local Internet Server Send(Upload)
transfers.
MFCC-2367
Logon failed intermittently for LDAP users.
MFCC-2364
SFTP transfers did not work when the Virtual Alias field contained multiple "/".
*Note: When a multi-level directory is contained in a virtual alias, the admin
must ensure that the directory in one virtual alias is not a parent or child
directory of another virtual alias for that user. Additionally, while you can
have the same virtual alias for an Upload and a Download definition, you cannot
use the same virtual alias for multiple Upload or Download definitions.
For example:
1. The following virtual aliases are supported since they do not have
a parent/child relationship.
Transfer Direction Virtual Alias Allowed?
------------------ ------------- --------
upload level1/level2 yes
download level1/level2 yes
upload or download level1/xyz yes
2. Multi-level virtual alias cannot have parent/child relationship.
Transfer Direction Virtual Alias Allowed?
------------------ ------------- --------
upload or download level1/ yes
upload or download level1/level2 no
3. Multi-level virtual alias for a single user cannot be duplicated.
Transfer Direction Virtual Alias Allowed?
------------------ ------------- --------
upload level1/level2 yes
download level1/level2 yes
upload or download level1/level2 no
MFCC-2359
The MFT Internet Server FTP server stopped responding when communicating with
both load balanced Internet Servers failed.
MFCC-2358
The date and time was missing from the File Token List page, PPA Token List
page and JMS Token List page. An illegal icon existed on these pages.
MFCC-2357
After clicking the help button on the admin page of MFT Command Center, the
user ID instead of the user name was displayed on the welcome bar.
MFCC-2356
It took a long response time for an LDAP user to log on MFT Command Center.
The following weblxml parameter is added to define whether to bypass LDAP sync
at logon time. The valid values are true or false.
<context-param>
<param-name>SyncLdapAtLogon</param-name>
<param-value>true</param-value>
</context-param>
MFCC-2355
The department field was not displayed on the Manage Job page of Scheduler.
MFCC-2197
The title of the alert email triggerred by MFT Internet Server 7.3.0 was
misleading.
MFCC-2179
The audit log was displayed on the Audit Search page without searching manually.
The following weblxml parameter is added to turn automatic audit search on/off.
The valid values are true or false.
<context-param>
<param-name>SearchAuditAtPageEntry</param-name>
<param-value>true</param-value>
</context-param>
Issue/Introduction
TIBCO
Managed File Transfer Command Center/Internet Server 7.3.0 hotfix HF-004 is now
available
Environment
Product: TIBCO Managed File Transfer Internet Server
Version:7.3.0
OS: All Supported Operating Systems
--------------------
Product: TIBCO Managed File Transfer Command Center
Version:7.3.0
OS: All Supported Operating Systems
--------------------
Feedback
Yes
No
Powered by
