Two reasons for receiving Error: “ERROR Unspecified error” when attempting to authenticate using RADIUS servers in TIBCO LogLogic SEM
Article ID: KB0076723
Updated On:
| Products | Versions |
|---|---|
| TIBCO LogLogic Security Event Manager | all versions |
Description
Here are two frequently encountered errors when using RADIUS authentication with associated guidance for what each error means and how to resolve it.
2008-10-30 01:25:12,662 [http-10443-2] ERROR Unspecified error net.sourceforge.jradiusclient.exception.RadiusException: Authenticators do not match, response packet not validated!
This means the SEM host did not use the proper shared key as what the RADIUS server was expecting so the recommendation is to verify the shared key being used on both the SEM and RADIUS server.
2008-10-30 01:33:21,032 [http-10443-2] ERROR Unspecified error net.sourceforge.jradiusclient.exception.RadiusException: Receive timed out
This error means that the proper host IP and/or port were not specified so the request was sent out but no response was received so the request timed out. Confirm the IP of your RADIUS server. By default RADIUS uses port 1812.
Issue/Introduction
This article provides details as to what the Error: “ERROR Unspecified error” can mean when authenticating to LogLogic SEM with RADIUS.
Feedback
Yes
No
Powered by
